Shelly Plus Plug S

unverified library/homeassistant/shelly-plus-plug-s.hal.yaml

Id	shelly-plus-plug-s
Manufacturer	Shelly
Model	Plus Plug S
Driver	homeassistant
Hazard	high
Limits	unconfirmed The library file holds suggested limits for relay, and no person has confirmed those limits yet. How a person confirms the limits

Control channels

Channel	Min	Max	Step	Rate per s	Unit	Confirm	Limit
relay					bool	confirm-each-time	suggested

Read channels

Channel	Type	Unit	Every
power	number	W	5 s
energy	number	kWh	60 s

openhal: "0.1"
device: { name: Shelly Plus Plug S, model: Plus Plug S, manufacturer: Shelly }
id: shelly-plus-plug-s
match:
  homeassistant: "*.shellyplusplugs_*"
connect:
  homeassistant: homeassistant.local
  port: 8123
  token_env: HA_TOKEN
  transport: websocket
  entities:
    - switch.shellyplusplugs_aabbccddeeff
    - sensor.shellyplusplugs_aabbccddeeff_power
    - sensor.shellyplusplugs_aabbccddeeff_energy
read:
  power: { unit: W, every: 5 s, range: [0, 2500], map: { entity: sensor.shellyplusplugs_aabbccddeeff_power } }
  energy: { unit: kWh, every: 60 s, map: { entity: sensor.shellyplusplugs_aabbccddeeff_energy } }
write:
  relay:
    type: bool
    confirm: confirm-each-time
    suggested: true
    map: { entity: switch.shellyplusplugs_aabbccddeeff }
safe_state: { relay: false }
hazard: high
notes: >-
  Suggested limits. A person must confirm every limit before this device can be written.
  Home Assistant names a Shelly that has no device name after its device id, such as
  shellyplusplugs-aabbccddeeff. Replace aabbccddeeff with your plug's id in every entity. The plug switches
  mains, so every change is confirmed each time and a stop turns it off.
provenance: { source: library, by: OpenHAL starter library, at: 2026-10-25, verification: { status: unverified } }