Siglent SPD3303X

unverified library/scpi/siglent-spd3303x.hal.yaml

Id	siglent-spd3303x
Manufacturer	Siglent
Model	SPD3303X
Driver	scpi
Hazard	medium
Limits	unconfirmed The library file holds suggested limits for ch1_output, ch2_output, set_ch1_voltage (action), set_ch1_current (action), set_ch2_voltage (action), set_ch2_current (action), and no person has confirmed those limits yet. How a person confirms the limits

Control channels
Channel	Min	Max	Step	Rate per s	Unit	Confirm	Limit
ch1_output					bool	confirm-each-time	suggested
ch2_output					bool	confirm-each-time	suggested

Actions
Action	Arguments	Confirm	Limit
set_ch1_voltage	volts 0 to 5 V, step 0.001	confirm-each-time	suggested
set_ch1_current	amps 0 to 0.5 A, step 0.001	confirm-each-time	suggested
set_ch2_voltage	volts 0 to 5 V, step 0.001	confirm-each-time	suggested
set_ch2_current	amps 0 to 0.5 A, step 0.001	confirm-each-time	suggested

Read channels
Channel	Type	Unit	Every
ch1_voltage	number	V	1 s
ch1_current	number	A	1 s
ch2_voltage	number	V	1 s
ch2_current	number	A	1 s

openhal: "0.1"
device: { name: Siglent SPD3303X power supply, model: SPD3303X, manufacturer: Siglent }
id: siglent-spd3303x
match:
  usb: ["0483:7540"]
  usb_class: usbtmc
  scpi_idn: "^Siglent Technologies, ?SPD3303X"
connect: { scpi: auto, timeout: 2 s, termination: lf }
read:
  ch1_voltage: { unit: V, every: 1 s, range: [0, 33], map: { query: "MEAS:VOLT? CH1" } }
  ch1_current: { unit: A, every: 1 s, range: [0, 3.3], map: { query: "MEAS:CURR? CH1" } }
  ch2_voltage: { unit: V, every: 1 s, range: [0, 33], map: { query: "MEAS:VOLT? CH2" } }
  ch2_current: { unit: A, every: 1 s, range: [0, 3.3], map: { query: "MEAS:CURR? CH2" } }
write:
  ch1_output: { type: bool, confirm: confirm-each-time, suggested: true, map: { set: "OUTP CH1,{on_off}" } }
  ch2_output: { type: bool, confirm: confirm-each-time, suggested: true, map: { set: "OUTP CH2,{on_off}" } }
actions:
  set_ch1_voltage:
    description: Set the channel 1 voltage.
    args:
      volts: { unit: V, min: 0, max: 5, step: 0.001 }
    confirm: confirm-each-time
    suggested: true
    map: { command: "CH1:VOLT {volts}" }
  set_ch1_current:
    description: Set the channel 1 current limit.
    args:
      amps: { unit: A, min: 0, max: 0.5, step: 0.001 }
    confirm: confirm-each-time
    suggested: true
    map: { command: "CH1:CURR {amps}" }
  set_ch2_voltage:
    description: Set the channel 2 voltage.
    args:
      volts: { unit: V, min: 0, max: 5, step: 0.001 }
    confirm: confirm-each-time
    suggested: true
    map: { command: "CH2:VOLT {volts}" }
  set_ch2_current:
    description: Set the channel 2 current limit.
    args:
      amps: { unit: A, min: 0, max: 0.5, step: 0.001 }
    confirm: confirm-each-time
    suggested: true
    map: { command: "CH2:CURR {amps}" }
safe_state:
  - { ch1_output: false, ch2_output: false }
hazard: medium
notes: >-
  Suggested limits. A person must confirm every limit before this device can be written.
  The SPD3303X and SPD3303X-E give 32 V and 3.2 A on channels 1 and 2. This file starts at 5 V and 0.5 A.
  The supply answers only lines that end in a newline. This file doesn't read the output state back, so
  the hub shows the last state it set. Channel 3 is set on the front panel and isn't controlled here.
provenance: { source: library, by: OpenHAL starter library, at: 2026-10-25, verification: { status: unverified } }