Korg nanoKONTROL2

unverified library/midi/korg-nanokontrol2.hal.yaml

Id	korg-nanokontrol2
Manufacturer	Korg
Model	nanoKONTROL2
Driver	midi
Hazard	low
Limits	unconfirmed The library file holds suggested limits for play_led, stop_led, record_led, and no person has confirmed those limits yet. How a person confirms the limits

Control channels

Channel	Min	Max	Step	Rate per s	Unit	Confirm	Limit
play_led					bool	none	suggested
stop_led					bool	none	suggested
record_led					bool	none	suggested

Read channels

Channel	Type	Unit	Every
slider_1	number	%	stream
slider_2	number	%	stream
slider_3	number	%	stream
slider_4	number	%	stream
slider_5	number	%	stream
slider_6	number	%	stream
slider_7	number	%	stream
slider_8	number	%	stream
knob_1	number	%	stream
knob_2	number	%	stream
knob_3	number	%	stream
knob_4	number	%	stream
knob_5	number	%	stream
knob_6	number	%	stream
knob_7	number	%	stream
knob_8	number	%	stream
play	bool		stream
stop	bool		stream
record	bool		stream

openhal: "0.1"
device: { name: Korg nanoKONTROL2 controller, model: nanoKONTROL2, manufacturer: Korg }
id: korg-nanokontrol2
match:
  usb: ["0944:0117"]
  usb_class: midi
connect: { midi: nanoKONTROL2, channel: 1 }
read:
  slider_1: { unit: percent, stream: true, map: { cc: 0 } }
  slider_2: { unit: percent, stream: true, map: { cc: 1 } }
  slider_3: { unit: percent, stream: true, map: { cc: 2 } }
  slider_4: { unit: percent, stream: true, map: { cc: 3 } }
  slider_5: { unit: percent, stream: true, map: { cc: 4 } }
  slider_6: { unit: percent, stream: true, map: { cc: 5 } }
  slider_7: { unit: percent, stream: true, map: { cc: 6 } }
  slider_8: { unit: percent, stream: true, map: { cc: 7 } }
  knob_1: { unit: percent, stream: true, map: { cc: 16 } }
  knob_2: { unit: percent, stream: true, map: { cc: 17 } }
  knob_3: { unit: percent, stream: true, map: { cc: 18 } }
  knob_4: { unit: percent, stream: true, map: { cc: 19 } }
  knob_5: { unit: percent, stream: true, map: { cc: 20 } }
  knob_6: { unit: percent, stream: true, map: { cc: 21 } }
  knob_7: { unit: percent, stream: true, map: { cc: 22 } }
  knob_8: { unit: percent, stream: true, map: { cc: 23 } }
  play: { type: bool, stream: true, map: { cc: 41 } }
  stop: { type: bool, stream: true, map: { cc: 42 } }
  record: { type: bool, stream: true, map: { cc: 45 } }
write:
  play_led: { type: bool, suggested: true, map: { cc: 41 } }
  stop_led: { type: bool, suggested: true, map: { cc: 42 } }
  record_led: { type: bool, suggested: true, map: { cc: 45 } }
safe_state: { play_led: false, stop_led: false, record_led: false }
hazard: low
notes: >-
  Suggested limits. A person must confirm every limit before this device can be written.
  These are the factory CC numbers in scene 1 on MIDI channel 1. The LEDs follow the hub only after you set
  LED mode to External in the KORG KONTROL Editor. MIDI can't ask a slider where it is, so each control reads
  unknown until it moves.
provenance: { source: library, by: OpenHAL starter library, at: 2026-10-25, verification: { status: unverified } }